Magnetoelastic fracture of soft ferromagnetic materials

Effects of magnetic field on fracture toughness of soft ferromagnetic materials were studied using experimental techniques and theoretical models. The manganese–zinc ferrite with a single-edge-notch-beam (SENB) were chosen to be the specimen and the Vickers’ indentation specimen subjected to a magnetic field were chosen to be the specimens. Results indicate that there is no significant variations of the measured fracture toughness of the manganese–zinc ferrite ceramic in the presence of the magnetic field. The theoretical model involves an anti-plane shear crack with finite length in an infinite magnetostrictive body where an in-plane magnetic field prevails at infinity. Magnetoelasticity is used. The crack-tip elastic field is different from that of the classical mode III fracture problem. Furthermore, the magnetoelastic fracture of the soft ferromagnetic material was studied by solving the stress field for a soft ferromagnetic plane with a center-through elliptical crack. The stress field at the tip of a slender elliptical crack is obtained for which only external magnetic field normal to the major axis of the ellipse is applied at infinity. The results indicate that the near field stresses are governed by the magnetostriction and permeability of the soft ferromagnetic material. The induction magnetostrictive modulus is a key parameter for finding whether magnetostriction or magnetic-force-induced deformation is dominant near the front an elliptically-shaped crack. The influence of the magnetic field on the apparent toughness of a soft ferromagnetic material with a crack-like flaw can be regarded approximately in two ways: one possesses a large induction magnetostrictive modulus and the other has a small modulus. Finally, a small-scale magnetic-yielding model was developed on the basis of linear magnetization to interpret the experimental results related to the fracture of the manganese–zinc ferrite ceramics under magnetic field. Studied also is the fracture test of the soft ferromagnetic steel with compact tension specimens published in the existing literature.     

Facile Fabrication of Zirconia Modified Screen‐Printed Carbon Electrodes for Electrochemical Sensing of Phosphate

We report here a facile method to immobilize zirconia nanoparticles on a disposable screen‐printed carbon electrode (designated as ZrO₂‐SPCE) for phosphate sensor application. Simply by ultrasonicating a bare SPCE in a ZrO₂ slurry, ZrO₂ nanoparticles can be immobilized effectively on the electrode surface as verified by surface characterization evidences. Using ferricyanide as a redox probe, an increase in the charge transfer resistance (R_ct) of ferricyanide upon adsorption of phosphate on ZrO₂ is used for the determination of phosphate. This ZrO₂‐SPCE phosphate sensor shows a wide linear range up to 1 mM and a detection limit of 1.69 µM (S/N=3). Practical applicability of the ZrO₂‐SPCE is demonstrated by detecting phosphate content in human blood samples.     

Surface-Modified Sb2S3 Nanoparticles and Their Tribological Behaviors in Liquid Paraffin

Sb₂S₃ nanoparticles surface-modified with S-tetradecyl N, N-dihydroxyethyl dithiocarbamate (C₁₄DTC-Sb₂S₃) have been synthesized via extraction of Sb₂S₃ colloidal particles from ethylene glycol into toluene in the presence of C₁₄DTC. The obtained products were characterized by high-resolution transmission electron microscope (HRTEM) and Fourier transformation infrared (FTIR), and their tribological behaviors as an additive in liquid paraffin were investigated using a four-ball tribometer. The results show that C₁₄DTC-Sb₂S₃ nanoparticles can significantly improve the friction reduction, anti-wear, and load-carrying properties of base oils. The preliminary lubrication mechanism was discussed based on the SEM and XPS investigation of the rubbed surfaces.     

Novel Calix[4]arene Azacrown Ether

1,3-diproyloxycalix[4]arene azacrown ether was successfully synthesized in the fixed 1,3-alternate conformation which was confirmed by a solid state structure.     

Thermal and optical properties of highly fluorinated copolymers of methacrylates

Copolymers of pentafluorophenylhexafluoroisopropyl methacrylate (FPPMA) with trifluoroethyl methacrylate (TFEMA) were prepared in THF solution and in bulk using azobisisobutyronitrile as a free radical initiator. The monomer reactivity ratios of TFEMA (M₁) and FPPMA (M₂) were calculated as r₁ = 0.55 and r₂ = 0.07. The refractive indices of poly(TFEMA) and poly(FPPMA) are very similar as 1.435 and 1.430, respectively, at 532 nm, and the copolymer films were transparent. The glass transition temperatures (T_g) of the copolymers were in the range of 80–90°C and showed a negative deviation from the Gordon–Taylor equation. The thermal decomposition temperature (T_d) was increased with the content of FPPMA in copolymers. Low water absorption for 1:1 FPPMA/TFEMA copolymer was detected. Copolymers of FPPMA with hexafluoroisopropyl methacrylate (HFPMA) were also prepared. The monomer reactivity ratios of HFPMA (M₁) and FPPMA (M₂) were calculated as r₁ = 0.43 and r₂ = 0.10. The T_gs of the copolymers were in the range of 88–95°C and showed also a negative deviation from the Gordon–Taylor equation. T_g and T_d of the copolymers were increased with the content of FPPMA. The refractive index of poly(HFPMA) (1.384 at 532 nm) is much lower than that of FPPMA homopolymer, but copolymer films obtained were clear and transparent. Copyright © 2013 John Wiley & Sons, Ltd.     

Anionic Conduction in Blends of Poly(Pyridinium Ethyl Methacrylate Perchloride) and Poly[Oligo(Oxyethylene) Methacrylate-Co-Acrylamide]

Abstract

Blends of poly(pyridinium ethyl methacrylate perchloride) and poly[oligo(oxyethylene) methacrylate-co-acrylamide] were prepared, and the ionic conductivity and mobility of the blends were investigated. Results indicate that both the transference of perchlorate anion and the dissociation of the polymeric salt in the comblike polyether obey the thermoactivation mechanism, and that the perchlorate anion in the blends is free.     

Evaluating a four-directional benzene-centered aliphatic polyamine curing agent for epoxy resins

A four-directional benzene-centered aliphatic polyamine, MXBDP, with high functionality and low volatility, is used to cure epoxy resin (DGEBA). Herein we originally report the isothermal cure kinetics and dynamic mechanical properties of DGEBA/MXBDP. Differential scanning calorimetry confirms that MXDBP is more reactive than commercial linear metaxylenediamine and branched Jeffamine T-403 and the isothermal curing reaction is autocatalytic. The Kamal model is found to be able to well describe the curing rate up to the onset of diffusion control, and the excellent match over the whole conversion range is achieved using the extended Kamal model. Interestingly, the isoconversional kinetic analysis indicates that the effective reaction activation energy (E _α ) changes substantially with conversion, and ultimately decreases to a very small value (<10 kJ mol^?1) because of the diffusion-controlled reaction kinetics. Then, dynamic mechanical analysis reveals that DGEBA/MXBDP exhibits the higher α- and β-relaxation temperatures and the much higher crosslink density than DGEBA/metaxylenediamine. Our experiment results support that MXBDP has the high reactivity and improved thermal resistance in combination with the advantages of the high functionality, low volatility and decreased CO₂ absorption. Therefore, MXBDP may be especially suitable for room temperature-cure epoxy coatings and adhesives.     

Single-Ion Conduction and Electrochemical Characteristics of Poly (Oxyethylene)/ Lithium Methoxy Oligo(Oxyethylene) Sulfate Blend

Abstract

The ion conduction of a blend of poly(oxyethylene) (PEO) and lithium methoxy oligo(oxyethylene) sulfate (SAL₈) and its electrochemical characteristics were studied. The maximum ambient conductivity of the blend reaches 1.2 × 10^?6 S/cm. The blend exhibits single-ion conduction, excellent mechanical performance, and electrochemical stability. A battery of Li/PEO + SAL₈/Li_1+xV₃O₈ has a constant discharge capacity at different discharge current densities up to a certain voltage, while the discharge capacity of Li/P (MEO_16-AM) + LiClO₄/Li_1+xV₃O₈ decreases with an increase of the discharge current density.     

Characterization of Nitro-Substituted Polybenzimidazole Synthesized by the Reaction with Nitric Acid

Abstract

Nitro-substituted poly[2,2′-(m-phenylene)-5,5′-bibenzimidazole]s (PBIs) were synthesized by the reaction of PBI with nitric acid in sulfuric acid under various conditions. The number of nitro groups substituted on the aromatic ring of PBI per polymeric unit varied from 1.44 to 3.55 according to the reaction conditions. An increase in reaction temperature and concentration of the nitric acid increased the degree of substitution. The inherent viscosity of the substituted polymer increased as the reaction temperature decreased. When the reaction temperature was 30°C, the inherent viscosity of the polymer increased as the concentration of nitric acid increased. The nitro-substituted PBI exhibited polyelectrolyte behavior in formic acid. The nitro groups substituted on PBI were dissociated when the polymer was heated to 450°C, displaying exothermic behavior, and the decomposition of polymer was proportional to its nitro group content. All nitro-substituted PBIs showed better solubilities in polar aprotic and acidic solvents, such as dimethylacetamide, dimethylsulfoxide, dimethylformamide, N-methylpyrrolidone, formic acid, sulfuric acid, and trifluoromethanesulfonic acid.     

石墨烯基铁氧化物磁性材料的制备及在水处理中的吸附性能

石墨烯及其衍生物氧化石墨烯均有良好的物理和化学性质,其巨大的表面积和丰富的官能团使其成为良好的吸附材料。石墨烯基磁性材料则综合了石墨烯的吸附能力和磁性材料易分离的特性,是水处理过程中具有巨大应用潜力的吸附材料。本文在论述了石墨烯、氧化石墨烯及铁氧化物磁性材料对水体中的重金属离子、有机染料及含苯环的芳香类污染物的吸附富集性能的基础上,重点介绍了石墨烯基铁氧化物磁性材料的不同合成方法及复合材料在水处理中去除污染物的能力,探讨了复合材料在水处理中的应用前景。